Showing posts with label HARLEY. Show all posts
Showing posts with label HARLEY. Show all posts

Thursday, September 8, 2011

COBRA FI2000R O2 FUEL PROCESSOR 07-09 HARLEY SOFTAILS

COBRA FI2000R O2 FUEL PROCESSOR 07-09 HARLEY SOFTAILS Reviews


Other Picture


THIS FUEL PROCESSOR FITS HARLEY DAVIDSON MODELS:

2002-2009 FXST(SOFTAIL STANDARD), FLST(HERITAGE SOFTAIL).

NOTE: THESE ARE NOT C.A.R.B APPROVED AND CANNOT BE USED IN CALIFORNIA.

Cobra FI2000R Plug-In Fuel Processor for Harley Davidson
The Fi2000 O2 digital fuel processor is designed to work with all H-D exhaust systems (stock or aftermarket) equipped with oxygen sensors in place (closed-loop design)
Works much like a carburetor jet kit with adjustments similar to the air-mixture screw, the needle and clip positions and the main jet
The Fi2000 increases horsepower and torque by optimizing stock lean air/fuel mixtures (helps cool the engine temps as well)
Quick and simple installation with plug-and-ride technology with OEM-style connectors
No confusing computer downloads to install
No expensive dyno testing required
Pre-configured from the factory for your make and model, but easy to adjust should your specific application need it
Improves overall rideability
Virtually eliminates backfiring on deceleration
Low-Speed - This control functions similar to the air mixture screw on a carburetor, controlling off-idle fuel demands and steady cruising.
Mid-Speed - This is the equivalent of the needle and slip position on a carburetor. Two increments correspond to dropping the clip on a needle one position. One increment is the same as adding a shim. This is where you get the proper fuel mixture under load and acceleration.
High-Speed - This is the electronic counterpart to your main jet. Each numbered increment is the same as going up one main jet size starting with the stock suze at zero. This adjusts your fuel at full throttle.


Visit Store Now !!

Detail Products

Detail Reviews




Sep 09, 2011 03:44:05

Wednesday, August 3, 2011

COBRA FI2000R DIGTL FUEL PROCESSOR 95-05 HARLEY TOURING

COBRA FI2000R DIGTL FUEL PROCESSOR 95-05 HARLEY TOURING Reviews


Other Picture


THIS FUEL PROCESSOR FITS HARLEY DAVIDSON MODELS:

1995-2005 FLHT(ELECTRA GLIDE),FLHR(ROAD KING),FLTR(ROAD GLIDE),FLHX(STREET GLIDE).

Cobra FI2000R Plug-In Fuel Processor for Harley Davidson

Proven Fi2000R comes with leads that snap directly into the bike's injector bodies
Open-loop design; 06 Dyna and all 07-08 models can use exhaust systems that do or do not have O2 sensor bungs
More advanced tuning for modified bikes
Think of third tuning pot as an electronic main jet while thinking of the entire Fi2000R as a digital jet kit
Full range of fuel adjustment (0-10 settings) across all rpm ranges
Three easy identifiable lights: green - Fi2000 is adding more fuel to the air/fuel ratio approx. 14:1; Green and yellow lights - these lights will be on in unison when throttle is open more quickly and air/fuel mixture is approx. 12.5:1; Red - light comes on and stays on as long as the Fi200 follows the fuel curve while adjusting to approx. 12.8:1 air/fuel ratio, which is where the engine will produce its best full-throttle power

Step-by-step instructions
Improves rideability by smoothing out the powerband and giving the bike more throttle response
Corrects lean air/fuel mixture problems; eliminates overheating, backfiring on deceleration, hesitation on acceleration or an uneven cruising rpm Waterproof circuit board
No fuel map adjustments or computer downloads required


Visit Store Now !!

Detail Products

Detail Reviews




Aug 03, 2011 21:43:07

Tuesday, July 12, 2011

VANCE AND HINES FUEL PAK 04-09 HARLEY DYNA 02-09 V-ROD

VANCE AND HINES FUEL PAK 04-09 HARLEY DYNA 02-09 V-ROD Reviews


Other Picture


VANCE AND HINES FUEL PAK 04-09 HARLEY DYNA 02-09 V-ROD Feature

  • Installing a performance exhaust system is only your first step.
  • Throttle position sensor-based system simplifies the process of fuel-injection tuning // Enables you to fine-tune the fuel mixture throughout the entire rpm range with the touch of a button
  • Increases power and improves throttle response // Very user friendly; plugs into the existing harness on the bike // No computer or software is required, simply punch in the values supplied with the Fuelpak
  • Values supplied are for use with Vance & Hines exhaust systems // Fuelpak will also work with other exhaust systems (contact V&H tech support for tuning information) // Includes all necessary mounting hardware
  • See our amazon store for additional VANCE & HINES products

THIS FUELPAK FIT HARLEY DAVIDSON MODELS:

2004-2009 DYNA AND 2002-2009 V-ROD. 2008-2009 STREETBOB

Your fuel injected American V-Twin is equipped with an ECU (electronic control unit) that's programmed to deliver fuel to the motor based on an air/fuel ratio for a stock air filter and stock exhaust system.

While the ECU can self-adjust for environmental factors such as temperature and altitude,
it can't adjust for mechanical changes like adding performance parts. When you install
a performance exhaust system, your airflow changes, so you need a fuel management system that adjusts your air/fuel ratio to match the changes.

Once Fuelpak is installed, locate your fuel map from the setting chart provided or look it up here.

Next, wth the ignition turned on, enter the values for your specific map directly into Fuelpak and calibrate your TPS (throttle position sensor). Finally, shut off the ignition, put the cover back on and you're ready to ride. That's the beauty of Fuelpak, you don't need to use a computer or tune on a dyno because the settings you enter are the result of our extensive dyno and road testing to find the ideal fuel map for your American V-Twin.

Fuelpak is installed, locate your fuel map from the setting chart provided or look it up here.

Next, wth the ignition turned on, enter the values for your specific map directly into Fuelpak and calibrate your TPS (throttle position sensor). Finally, shut off the ignition, put the cover back on and you're ready to ride. That's the beauty of Fuelpak, you don't need to use a computer or tune on a dyno because the settings you enter are the result of our extensive dyno and road testing to find the ideal fuel map for your American V-Twin.

That fuel management system is Fuelpak. The perfect combination with your performance exhaust system


Visit Store Now !!

Detail Products

Detail Reviews




Jul 13, 2011 06:15:03

Friday, July 1, 2011

COBRA FI2000R DIGITAL FUEL PROCESSOR 08-9 HARLEY V-ROD

COBRA FI2000R DIGITAL FUEL PROCESSOR 08-9 HARLEY V-ROD Reviews


Other Picture


THIS FUEL PROCESSOR FITS HARLEY DAVIDSON MODELS:

2008-2009 V-ROD.

NOTE: THESE ARE NOT C.A.R.B APPROVED AND CANNOT BE USED IN CALIFORNIA.

Cobra FI2000R Plug-In Fuel Processor for Harley Davidson

Proven Fi2000R comes with leads that snap directly into the bike's injector bodies
Open-loop design; 06 Dyna and all 07-08 models can use exhaust systems that do or do not have O2 sensor bungs
More advanced tuning for modified bikes
Think of third tuning pot as an electronic main jet while thinking of the entire Fi2000R as a digital jet kit
Full range of fuel adjustment (0-10 settings) across all rpm ranges
Three easy identifiable lights: green - Fi2000 is adding more fuel to the air/fuel ratio approx. 14:1; Green and yellow lights - these lights will be on in unison when throttle is open more quickly and air/fuel mixture is approx. 12.5:1; Red - light comes on and stays on as long as the Fi200 follows the fuel curve while adjusting to approx. 12.8:1 air/fuel ratio, which is where the engine will produce its best full-throttle power

Step-by-step instructions
Improves rideability by smoothing out the powerband and giving the bike more throttle response
Corrects lean air/fuel mixture problems; eliminates overheating, backfiring on deceleration, hesitation on acceleration or an uneven cruising rpm Waterproof circuit board
No fuel map adjustments or computer downloads required


Visit Store Now !!

Detail Products

Detail Reviews




Jul 01, 2011 11:44:06

Friday, May 6, 2011

POWER COMMANDER III USB FOR HARLEY 07-08 DYNA GLIDE

POWER COMMANDER III USB FOR HARLEY 07-08 DYNA GLIDE Reviews


Other Picture


POWER COMMANDER III USB FOR HARLEY 07-08 DYNA GLIDE Feature

  • FREE installation of a custom map to match your exhaust system. Just email with your setup unleashedmoto@yahoo.com
  • Works with Any Exhaust // Increased Horsepower & Torque // Increased Horsepower & Torque
  • New feature Rev X-tend -Increase stock rev limiter // Individual Cylinder Mapping
  • W/02 Eliminators // Individual Cylinder Mapping // Ignition Timing Adjustment // Reduces or eliminates Decel Popping
  • See our amazon store for additional Power Commander products

THIS POWER COMMANDER FITS HARLEY DAVIDSON MODELS:

2007-2008 DYNA GLIDE WITH O2 ELIMINATORS.

NOTE: NOT LEGAL FOR SALE OR USE ON POLLUTION CONTROLLED VEHICLES.

Dynojet Research, Inc. is the world leader in the development and manufacturing of performance enhancement products and tools
Provides precise information for fine-tuning a fuel-injected motorcycle when changing an air filter, installing a new exhaust system or doing additional engine performance modifications
Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock - Dynojet continuously maps new calibrations for each bike for downloading at their website
If you do not have a computer, you can change the settings with three touch buttons on the faceplate
OEM-style wiring connectors with improved harness protection are supplied - no wiring modifications required
Includes easy-to-follow instructions
Direct injector control technology manages the fuel curve on models that do not have the sensors to monitor fuel adjustment
Features an expansion port for future add-on modules from Dynojet
USB power programming module is necessary to provide voltage to your Power Commander when it is removed from the bike and attached to your PC (must be purchased separately; not required if module is installed on bike)
Software is compatible with Windows 98se/ME/2000/XP - opens all maps with .djm extension
USB 9V Power Adapter is included, optional adapters also available
Made in the U.S.A!


Visit Store Now !!

Detail Products

Detail Reviews




May 07, 2011 08:12:04

Wednesday, April 13, 2011

COBRA FI2000R O2 DGTL FUEL PROCESSOR 08-9 HARLEY ROCKER

COBRA FI2000R O2 DGTL FUEL PROCESSOR 08-9 HARLEY ROCKER Reviews


Other Picture


THIS FUEL PROCESSOR FITS HARLEY DAVIDSON MODELS:

2008-2009 FXCW(ROCKER)FXCWC(CROSSBONES).

NOTE: THESE ARE NOT C.A.R.B APPROVED AND CANNOT BE USED IN CALIFORNIA.

Cobra FI2000R Plug-In Fuel Processor for Harley Davidson
The Fi2000 O2 digital fuel processor is designed to work with all H-D exhaust systems (stock or aftermarket) equipped with oxygen sensors in place (closed-loop design)
Works much like a carburetor jet kit with adjustments similar to the air-mixture screw, the needle and clip positions and the main jet
The Fi2000 increases horsepower and torque by optimizing stock lean air/fuel mixtures (helps cool the engine temps as well)
Quick and simple installation with plug-and-ride technology with OEM-style connectors
No confusing computer downloads to install
No expensive dyno testing required
Pre-configured from the factory for your make and model, but easy to adjust should your specific application need it
Improves overall rideability
Virtually eliminates backfiring on deceleration
Low-Speed - This control functions similar to the air mixture screw on a carburetor, controlling off-idle fuel demands and steady cruising.
Mid-Speed - This is the equivalent of the needle and slip position on a carburetor. Two increments correspond to dropping the clip on a needle one position. One increment is the same as adding a shim. This is where you get the proper fuel mixture under load and acceleration.
High-Speed - This is the electronic counterpart to your main jet. Each numbered increment is the same as going up one main jet size starting with the stock suze at zero. This adjusts your fuel at full throttle.


Visit Store Now !!

Detail Products

Detail Reviews




Apr 14, 2011 04:58:05

Tuesday, March 22, 2011

MIKUNI HSR 42 42MM EASY KIT HARLEY EVO & TWIN CAM

MIKUNI HSR 42 42MM EASY KIT HARLEY EVO & TWIN CAM Reviews


Other Picture


MIKUNI HSR 42 42MM EASY KIT HARLEY EVO & TWIN CAM Feature

  • BRAND NEW
  • FITS EVOLUTION & TWIN CAM MODELS
  • WORKS WITH STOCK CABLES
IN STOCK! WE SHIP SAME OR NEXT WORKING DAY BRAND NEW PART # 42-18 YOU ARE BUYING A BRAND NEW IN THE BOX MIKUNI EASY KIT HSR PERFORMANCE CARB FOR ALL 1999-2006 HARLEY TWIN CAM,1990-1999 EVO(THIS WILL NOT WORK WITH CRUSE CONTROL)EASY KIT #42-18.


Visit Store Now !!

Detail Products

Detail Reviews




Mar 23, 2011 09:51:03