1989 Honda VT 600 C Vlx Intake Manifold Set

1989 Honda VT 600 C Vlx Intake Manifold Set Reviews

Other Picture

1989 Honda VT 600 C Vlx Intake Manifold Set Feature

• The Intake Manifolds mount between the Intake Ports on the Head and the Carburetor/Throttle Bodies. This is a complete set of manifold(s) for your motorcycle.
• Used Intake Mainfolds will be intact and in good usable condition. They will not be cracked or dry-rotted, and will not leak. A thin film of light oil will help the Carbs/FI slip into the Intake Manifolds when reassembling your bike.
• Sample Picture of Intake Manifold Set Shown, not necessarily the Intake Manifold Set for your bike. You will be shipped the correct part for a 1989 Honda VT 600 C Vlx
• Click here to see other parts for your motorcycle

1989 Honda VT 600 C Vlx Intake Manifold Set

The Intake Manifolds mount between the Intake Ports on the Head and the Carburetor/Throttle Bodies. This is a complete set of manifold(s) for your motorcycle. The Condition of this part is Used.

Used Intake Mainfolds will be intact and in good usable condition. They will not be cracked or dry-rotted, and will not leak. A thin film of light oil will help the Carbs/FI slip into the Intake Manifolds when reassembling your bike.

Click here to see other parts for your motorcycle

Visit Store Now !!

Detail Products

Detail Reviews

Aug 29, 2011 04:19:06

Honda TRX450r 06-08 Velocity Intake System

Honda TRX450r 06-08 Velocity Intake System Reviews

Other Picture

Honda TRX450r 06-08 Velocity Intake System Feature

• Aluminum Intake Replaces Factory Airbox
• K&N air filter and Outerwears pre-filter
• Silicon intake seal with all hardware
• Polished Finish (3.8 lbs. lighter than stock airbox)
• Jetting Recommendations Included

Honda TRX450r Velocity Intake System 2006-2009 model years Replaces factory airbox with a mandrel bent and ultra-light aluminum intake tube, increases intake velocity for max power in dry conditions. K&N filter included! Increases intake velocity for max power at high RPM's with a noticeable increase in bottom end torque. Why? The stock airbox can impair airflow at high RPM while at low RPM the stock intake snorkel can collapse when you jump on the throttle with. For that reason this intake really kicks up the throttle response and power at low-mid RPM. And you will feel the mid-high RPM power increase when you completely un-restrict your 450r's carb, the open intake lets the motor rev freely to the rev limiter. Works best with full performance exhaust system! Comes with K&N RU-0640 and water repellent Outerwears 20-1090-01 Fits both kick and electric start models. This intake is designed for dry riding conditions only , and is perfect for drag or TT racing and absolute dune ripping. Shaves off 3.8 lbs. from stock aribox this intake with filter and hardware is only 1.1 lbs vs stock 4.9 lbs. Intake tube starts with a 6061 T6 aluminum tubing and is mandrel bent ever so slightly, welded bracket bolts to the left airbox mounting pad. Bright polished finish, 6061 can be hand polished to a mirror shine. No additional fabrication necessary, this is a simple bolt on unit!!! This Velocity Intake System completely replaces your stock airbox and snorkel from the carburetor/throttle-body to the filter. This intake kit is not intended for use in water or wet conditions.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 25, 2011 09:26:04

2002 Kawasaki ZX12 ZX 12 B Ninja Intake Manifold Set

2002 Kawasaki ZX12 ZX 12 B Ninja Intake Manifold Set Reviews

Other Picture

2002 Kawasaki ZX12 ZX 12 B Ninja Intake Manifold Set Feature

• The Intake Manifolds mount between the Intake Ports on the Head and the Carburetor/Throttle Bodies. This is a complete set of manifold(s) for your motorcycle.
• Used Intake Mainfolds will be intact and in good usable condition. They will not be cracked or dry-rotted, and will not leak. A thin film of light oil will help the Carbs/FI slip into the Intake Manifolds when reassembling your bike.
• Sample Picture of Intake Manifold Set Shown, not necessarily the Intake Manifold Set for your bike. You will be shipped the correct part for a 2002 Kawasaki ZX12 ZX 12 B Ninja
• Click here to see other parts for your motorcycle
• Kawasaki Model Identification Note: On all Kawasaki models produced after 1980, the 7th digit of your motorcycle's VIN (it is a letter) is critical in identifying the model of motorcycle you own. For example, if you own a 2000 ZX6, and the 7th digit of the VIN is an E, then you own a 2000 ZX6 E; If you own a 2001 Vulcan 1500, and the 7th digit of the VIN is a G, then you own a 2001 Vulcan 1500 G. Please confirm the 7th digit of your VIN number before placing your order.

2002 Kawasaki ZX12 ZX 12 B Ninja Intake Manifold Set

The Intake Manifolds mount between the Intake Ports on the Head and the Carburetor/Throttle Bodies. This is a complete set of manifold(s) for your motorcycle. The Condition of this part is Used.

Used Intake Mainfolds will be intact and in good usable condition. They will not be cracked or dry-rotted, and will not leak. A thin film of light oil will help the Carbs/FI slip into the Intake Manifolds when reassembling your bike.

Click here to see other parts for your motorcycle

Visit Store Now !!

Detail Products

Detail Reviews

Jun 07, 2011 09:48:03

2006 Kawasaki ZX636 ZX 636 Ninja Intake Manifold Set

2006 Kawasaki ZX636 ZX 636 Ninja Intake Manifold Set Reviews

Other Picture

2006 Kawasaki ZX636 ZX 636 Ninja Intake Manifold Set Feature

• The Intake Manifolds mount between the Intake Ports on the Head and the Carburetor/Throttle Bodies. This is a complete set of manifold(s) for your motorcycle.
• Used Intake Mainfolds will be intact and in good usable condition. They will not be cracked or dry-rotted, and will not leak. A thin film of light oil will help the Carbs/FI slip into the Intake Manifolds when reassembling your bike.
• Sample Picture of Intake Manifold Set Shown, not necessarily the Intake Manifold Set for your bike. You will be shipped the correct part for a 2006 Kawasaki ZX636 ZX 636 Ninja
• Click here to see other parts for your motorcycle
• Kawasaki Model Identification Note: On all Kawasaki models produced after 1980, the 7th digit of your motorcycle's VIN (it is a letter) is critical in identifying the model of motorcycle you own. For example, if you own a 2000 ZX6, and the 7th digit of the VIN is an E, then you own a 2000 ZX6 E; If you own a 2001 Vulcan 1500, and the 7th digit of the VIN is a G, then you own a 2001 Vulcan 1500 G. Please confirm the 7th digit of your VIN number before placing your order.

2006 Kawasaki ZX636 ZX 636 Ninja Intake Manifold Set

The Intake Manifolds mount between the Intake Ports on the Head and the Carburetor/Throttle Bodies. This is a complete set of manifold(s) for your motorcycle. The Condition of this part is Used.

Used Intake Mainfolds will be intact and in good usable condition. They will not be cracked or dry-rotted, and will not leak. A thin film of light oil will help the Carbs/FI slip into the Intake Manifolds when reassembling your bike.

Click here to see other parts for your motorcycle

Visit Store Now !!

Detail Products

Detail Reviews

Jun 04, 2011 18:27:04

1986 Honda GL 1200 I Goldwing Interstate Intake Manifold Set

1986 Honda GL 1200 I Goldwing Interstate Intake Manifold Set Reviews

Other Picture

1986 Honda GL 1200 I Goldwing Interstate Intake Manifold Set Feature

• The Intake Manifolds mount between the Intake Ports on the Head and the Carburetor/Throttle Bodies. This is a complete set of manifold(s) for your motorcycle.
• Used Intake Mainfolds will be intact and in good usable condition. They will not be cracked or dry-rotted, and will not leak. A thin film of light oil will help the Carbs/FI slip into the Intake Manifolds when reassembling your bike.
• Sample Picture of Intake Manifold Set Shown, not necessarily the Intake Manifold Set for your bike. You will be shipped the correct part for a 1986 Honda GL 1200 I Goldwing Interstate
• Click here to see other parts for your motorcycle

1986 Honda GL 1200 I Goldwing Interstate Intake Manifold Set

The Intake Manifolds mount between the Intake Ports on the Head and the Carburetor/Throttle Bodies. This is a complete set of manifold(s) for your motorcycle. The Condition of this part is Used.

Used Intake Mainfolds will be intact and in good usable condition. They will not be cracked or dry-rotted, and will not leak. A thin film of light oil will help the Carbs/FI slip into the Intake Manifolds when reassembling your bike.

Click here to see other parts for your motorcycle

Visit Store Now !!

Detail Products

Detail Reviews

May 02, 2011 09:01:10

2003 Yamaha XVS 650 A V-star Classic Intake Manifold Set

2003 Yamaha XVS 650 A V-star Classic Intake Manifold Set Reviews

Other Picture

2003 Yamaha XVS 650 A V-star Classic Intake Manifold Set Feature

• The Intake Manifolds mount between the Intake Ports on the Head and the Carburetor/Throttle Bodies. This is a complete set of manifold(s) for your motorcycle.
• Used Intake Mainfolds will be intact and in good usable condition. They will not be cracked or dry-rotted, and will not leak. A thin film of light oil will help the Carbs/FI slip into the Intake Manifolds when reassembling your bike.
• Sample Picture of Intake Manifold Set Shown, not necessarily the Intake Manifold Set for your bike. You will be shipped the correct part for a 2003 Yamaha XVS 650 A V-star Classic
• Click here to see other parts for your motorcycle

2003 Yamaha XVS 650 A V-star Classic Intake Manifold Set

The Intake Manifolds mount between the Intake Ports on the Head and the Carburetor/Throttle Bodies. This is a complete set of manifold(s) for your motorcycle. The Condition of this part is Used.

Used Intake Mainfolds will be intact and in good usable condition. They will not be cracked or dry-rotted, and will not leak. A thin film of light oil will help the Carbs/FI slip into the Intake Manifolds when reassembling your bike.

Click here to see other parts for your motorcycle

Visit Store Now !!

Detail Products

Detail Reviews

Apr 16, 2011 14:38:05

2001 Kawasaki ZX9 ZX 9 E Ninja Intake Manifold Set

2001 Kawasaki ZX9 ZX 9 E Ninja Intake Manifold Set Reviews

Other Picture

2001 Kawasaki ZX9 ZX 9 E Ninja Intake Manifold Set Feature

• The Intake Manifolds mount between the Intake Ports on the Head and the Carburetor/Throttle Bodies. This is a complete set of manifold(s) for your motorcycle.
• Used Intake Mainfolds will be intact and in good usable condition. They will not be cracked or dry-rotted, and will not leak. A thin film of light oil will help the Carbs/FI slip into the Intake Manifolds when reassembling your bike.
• Sample Picture of Intake Manifold Set Shown, not necessarily the Intake Manifold Set for your bike. You will be shipped the correct part for a 2001 Kawasaki ZX9 ZX 9 E Ninja
• Click here to see other parts for your motorcycle
• Kawasaki Model Identification Note: On all Kawasaki models produced after 1980, the 7th digit of your motorcycle's VIN (it is a letter) is critical in identifying the model of motorcycle you own. For example, if you own a 2000 ZX6, and the 7th digit of the VIN is an E, then you own a 2000 ZX6 E; If you own a 2001 Vulcan 1500, and the 7th digit of the VIN is a G, then you own a 2001 Vulcan 1500 G. Please confirm the 7th digit of your VIN number before placing your order.

2001 Kawasaki ZX9 ZX 9 E Ninja Intake Manifold Set

The Intake Manifolds mount between the Intake Ports on the Head and the Carburetor/Throttle Bodies. This is a complete set of manifold(s) for your motorcycle. The Condition of this part is Used.

Used Intake Mainfolds will be intact and in good usable condition. They will not be cracked or dry-rotted, and will not leak. A thin film of light oil will help the Carbs/FI slip into the Intake Manifolds when reassembling your bike.

Click here to see other parts for your motorcycle

Visit Store Now !!

Detail Products

Detail Reviews

Apr 12, 2011 00:02:06

1998 Honda VT 750 C Shadow Ace Intake Manifold Set

1998 Honda VT 750 C Shadow Ace Intake Manifold Set Reviews

Other Picture

1998 Honda VT 750 C Shadow Ace Intake Manifold Set Feature

• The Intake Manifolds mount between the Intake Ports on the Head and the Carburetor/Throttle Bodies. This is a complete set of manifold(s) for your motorcycle.
• Used Intake Mainfolds will be intact and in good usable condition. They will not be cracked or dry-rotted, and will not leak. A thin film of light oil will help the Carbs/FI slip into the Intake Manifolds when reassembling your bike.
• Sample Picture of Intake Manifold Set Shown, not necessarily the Intake Manifold Set for your bike. You will be shipped the correct part for a 1998 Honda VT 750 C Shadow Ace
• Click here to see other parts for your motorcycle

1998 Honda VT 750 C Shadow Ace Intake Manifold Set

The Intake Manifolds mount between the Intake Ports on the Head and the Carburetor/Throttle Bodies. This is a complete set of manifold(s) for your motorcycle. The Condition of this part is Used.

Used Intake Mainfolds will be intact and in good usable condition. They will not be cracked or dry-rotted, and will not leak. A thin film of light oil will help the Carbs/FI slip into the Intake Manifolds when reassembling your bike.

Click here to see other parts for your motorcycle

Visit Store Now !!

Detail Products

Detail Reviews

Mar 28, 2011 03:16:06

1999 Suzuki GSX 600 F Katana Intake Manifold Set

1999 Suzuki GSX 600 F Katana Intake Manifold Set Reviews

Other Picture

1999 Suzuki GSX 600 F Katana Intake Manifold Set Feature

• The Intake Manifolds mount between the Intake Ports on the Head and the Carburetor/Throttle Bodies. This is a complete set of manifold(s) for your motorcycle.
• Used Intake Mainfolds will be intact and in good usable condition. They will not be cracked or dry-rotted, and will not leak. A thin film of light oil will help the Carbs/FI slip into the Intake Manifolds when reassembling your bike.
• Sample Picture of Intake Manifold Set Shown, not necessarily the Intake Manifold Set for your bike. You will be shipped the correct part for a 1999 Suzuki GSX 600 F Katana
• Click here to see other parts for your motorcycle

1999 Suzuki GSX 600 F Katana Intake Manifold Set

The Intake Manifolds mount between the Intake Ports on the Head and the Carburetor/Throttle Bodies. This is a complete set of manifold(s) for your motorcycle. The Condition of this part is Used.

Used Intake Mainfolds will be intact and in good usable condition. They will not be cracked or dry-rotted, and will not leak. A thin film of light oil will help the Carbs/FI slip into the Intake Manifolds when reassembling your bike.

Click here to see other parts for your motorcycle

Visit Store Now !!

Detail Products

Detail Reviews

Mar 24, 2011 04:58:03